Greetings:
You can get this tool from suppliers like N Nock/BCS. I
made one to check the diff by grinding 1/32 inch off each side of a extra 1/2
inch short socket wrench extension. Of course the short extension is
dedicated to this job now.
Dick M.
Bj8
----- Original Message -----
From: Greg Wilkinson<mailto:gregwilkinson@adelphia.net>
To: Ned
Smith<mailto:smithn00@kitepilot.net>
Cc: Healey
List<mailto:healeys@autox.team.net>
Sent: Wednesday, June 21, 2006 7:32 PM
Subject: RE: Differential/Gearbox Drain Plug Wrench
Hi Ned,
I went to a
hardware store and bought a 1 foot long 7/16" square bar. Cut it
to 2" and
put it in a 7/16" 8 point socket wrench. I think 9/16" 12 point
will work
also.
-----Original Message-----
Does anyone know where I can get one of
these. A 3/8 socket wrench works but
I would like to have the right tool for
the job. And Ed, don't suggest
Google. I tried that with no luck Perhaps I
don't know the right name for
the tool.
Ned Smith
BJ8
|