healeys
[Top] [All Lists]

throttle linkage adjustment

To: Healey <Healeys@autox.team.net>
Subject: throttle linkage adjustment
From: Bob Haskell <rchaskell@earthlink.net>
Date: Sun, 13 Aug 2006 18:34:19 -0400
Hi all,

The workshop manual (Section A.37) says that "the linkage may be adjusted to 
allow the toe board to act as a positive stop to the accelerator pedal when the 
throttles are fully open." ... "Place a wooden block "D" 2 1/2 in. (63.5 mm.) 
thick between the pedal and the toe board.  Push the pedal down to retain the 
block against the toe board."

Is this with the jute/carpet installed?

Bob




<Prev in Thread] Current Thread [Next in Thread>