healeys
[Top] [All Lists]

Re: Facet pump intallation BJ-8

To: glemon@neb.rr.com, davzu29@cox.net, Healeys@autox.team.net
Subject: Re: Facet pump intallation BJ-8
From: Awgertoo@aol.com
Date: Sun, 8 Oct 2006 19:45:29 EDT
In a message dated 10/8/2006 7:17:50 P.M. Eastern Daylight Time,  
glemon@neb.rr.com writes:

"in any  case don't forget  to provide a new ground for the gas guage.  
Best--Michael Oritt"

Michael, can you expand upon this  statement?



--------------------------------------
Greg--
 
The steel fuel line running from the tank to the SU provides a  ground for 
the sender and  cutting the fuel line to insert a filter,  auxiliary pump, etc. 
cuts this ground.  It's possible that the tank  might be touching the body 
and/or that the hold-down straps might provide  continuity from the tank to 
ground but a simple ground wire from the sender will  ensure good ground 
contact. 
 
Best--Michael Oritt




<Prev in Thread] Current Thread [Next in Thread>