healeys
[Top] [All Lists]

Re: Test

To: "HealeyList" <healeys@autox.team.net>, "Michael Salter"
Subject: Re: Test
From: "Robert Poague" <rapoague@comcast.net>
Date: Sun, 29 Apr 2007 17:27:08 -0700
Michael...I'm getting your messages just fine on the List, along with 
several of the others' who think they may be having problems. The fault may 
exist on the receivers' end (spam filters, firewalls, etc.).
Bob
BJ7

----- Original Message ----- 
From: "Michael Salter" <msalter@precisionsportscar.com>
To: "'Quinn, Patrick'" <Patrick.Quinn@det.nsw.edu.au>; "'healeys'" 
<healeys@autox.team.net>; <Awgertoo@aol.com>
Sent: Sunday, April 29, 2007 4:48 PM
Subject: RE: Test


> Thanks guys...wonder why this won't go to the list?
>
> Whenever the time comes to rebuild a six cylinder engine I get really
> nervous when I have to mount that big lump on my engine build stand. In
> addition to the fact that the whole thing is a bit unstable it is 
> impossible
> to install the rear engine plate to the block or the flywheel to the
> crankshaft when the engine is mounted in the "normal" manner.
> Engine stands for building aircraft engines are much better thought out 
> and
> almost without exception the engine is mounted to the build stand in such 
> a
> way that every component can be easily removed or fitted without having to
> lift the engine off the stand.
> I have drawn up a simple adaptor for the Healey 6 cylinder block which
> should allow this to be achieved using a standard engine stand.
> I don't have any 6 cylinder engines in the works at the moment but if
> someone out there is about to start one of these projects I would be happy
> to share my drawings to enable them to build such an adaptor.
> The person would have to have access to a laser or plasma profile cutter
> capable of handling = steel plate, a drill press and welding facilities.
> Any takers?
>
> Michael Salter
> 100S (1955)
> 3000 Mk111(1965)
> 100 (1953)
> AHX12 (1953)
> Bugeye (1961)
> http://www.netbug.net/blogmichael/




<Prev in Thread] Current Thread [Next in Thread>
  • RE: Test, Quinn, Patrick
    • Test, Michael Salter
    • RE: Test, Michael Salter
    • Re: Test, Robert Poague <=