healeys
[Top] [All Lists]

RE: !00M brace

To: "'Mark'" <mark@nashvilletn.org>, <healeys@autox.team.net>
Subject: RE: !00M brace
From: "Michael Salter" <msalter@precisionsportscar.com>
Date: Thu, 17 May 2007 10:39:33 -0400
"It was an easy little project that only took about 4
HOURS!"
Ah yes....another of those 10 minute jobs...I do them often :-)

Michael Salter
100S (1955)
3000 Mk111(1965)
100 (1953)
AHX12 (1953)
Bugeye (1961)
http://www.netbug.net/blogmichael/
-----Original Message-----
From: owner-healeys@autox.team.net [mailto:owner-healeys@autox.team.net] On
Behalf Of Mark
Sent: May 17, 2007 10:35 AM
To: healeys@autox.team.net
Subject: Re: !00M brace

I made one from aluminium using the original as a pattern but extending the
top to clear the cold air box.  I did stamp the date on is so some future
Healey archivist wouldn't think that there were a few "special" cars that
had
an aluminium brace.  It was an easy little project that only took about 4
HOURS!

Mark
Nashville
http://www.ArrestMeRed.com




<Prev in Thread] Current Thread [Next in Thread>