Scott,
I would suspect the brass cup (bush) that fits on the end of the gear
shifter as it nest into the lever control has separated into it's two parts
and is now prohibiting the shift lever from moving the lever control.
Prior to removing the side cover, I would recommend removing the 3 nuts that
secure the shift lever in place, remove the shift lever and associated
parts, and determine if the brass cup has dislodged.
A nylon replacement part is available for the brass cup (bush) which is
reported to solve the problem of the brass part separating.
Ron Ray
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|