healeys
[Top] [All Lists]

Re: [Healeys] Gasket sealants

To: <healeys@autox.team.net>
Subject: Re: [Healeys] Gasket sealants
From: "Jerry Costanzo" <grumpyinloomis@ssctv.net>
Date: Thu, 9 Aug 2007 09:10:57 -0700
--===============1514099450==
Content-Type: text/plain; format=flowed; charset="windows-1250";
        reply-type=original
Content-Transfer-Encoding: 7bit

I have used the "right stuff"  it is easy to apply with the can and 
applicator tip.  It seems to seal very well.  I had better luck with this 
stuff than hylomar on the rear engine seal.

Jerry
----- Original Message ----- 
From: "Ron Fine" <RonFineEsq@earthlink.net>
To: <healeys@autox.team.net>; "david porter" <frogeye@swcp.com>
Sent: Thursday, August 09, 2007 7:29 AM
Subject: Re: [Healeys] Gasket sealants


> Do you use it with a paper gasket or by itself?  The web site clearly
> indicates that "The Right Stuff" is intended to be used without a gasket. 
> I
> have never done that and I know that modern cars are put together without
> gaskets all the time but the sealing surfaces of the MG transmission are 
> not
> very accurate.
> Ron
>
>
>> Permatex "Right Stuff"
>> Is, well great stuff.
>> Dave
>


--------------------------------------------------------------------------------


> _______________________________________________
> grumpyinloomis@ssctv.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys

--===============1514099450==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

--===============1514099450==--

<Prev in Thread] Current Thread [Next in Thread>