Bill, find a straight used one if you can. Aftermarket repros of most
body parts will almost surely not fit...at least that has been my
experience. Even a good used one may be difficult to fit if your car
has been crunched.
Jack
-----Original Message-----
From: healeys-bounces+jnbrashear=garverengineers.com@autox.team.net
[mailto:healeys-bounces+jnbrashear=garverengineers.com@autox.team.net]
On Behalf Of Wilkmanracing@aol.com
Sent: Wednesday, October 10, 2007 4:13 PM
To: healeys@autox.team.net
Subject: [Healeys] BT7 Trunk/Boot
I'm in the process of stripping my BT7 down for body work corrections
and a
fresh paint job. The trunk had about a ton and a half of Bondo on it,
hiding
a previous shunt. I'm considering buying a new trunk lid rather than
trying
to work with what I have. Moss has a repro lid for about a grand,
which
seems a little pricey. Does anyone know of a good source for this
part? I'd
consider a good used part if any listers know where one can be found.
My main
concern is to obtain a trunk lid that fits.
Thanks.
Bill Wilkman
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|