Jon:
I just rebuilt both the brake and clutch master cylinders resleved in
stainless steel. You will need to remove both whether you resleve or not.
I found lots of information in the archives on this subject.
Dan
-----Original Message-----
From: healeys-bounces+dan=warner-associates.com@autox.team.net
[mailto:healeys-bounces+dan=warner-associates.com@autox.team.net] On Behalf
Of STOCKLAND@aol.com
Sent: Thursday, November 15, 2007 1:59 PM
To: healeys@autox.team.net
Subject: [Healeys] Brake Master Cylinder
I need to rebuild my BJ 8 master cylinder. Does it have to be removed from
the car or can it be done from inside the drivers compartment?
Thanks for your help.
Jon
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|