healeys
[Top] [All Lists]

Re: [Healeys] BJ8 Painting engine compartment

To: "Freese, Ken" <Kendall.Freese@aerojet.com>
Subject: Re: [Healeys] BJ8 Painting engine compartment
From: Bob Spidell <bspidell@comcast.net>
Date: Wed, 21 Nov 2007 18:14:49 -0800
Ken,

Good numbers.  Did you use stock cam, pistons, etc.?


bs


Freese, Ken wrote:
> I have my engine back from the dyno. 160hp max at 5000 and 175 to 183
> ft-lb from somewhere under 2700 RPM to 4800. No oil leaks either.
> Of course my engine compartment is way to scruffy not to put the engine
> in.
> I just got a quart of paint mixed up in OE White and cut a new piece of
> firewall insulation. Any tips on masking the wiring harness and
> electrical components under the bonnet?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
>   


-- 
***************************************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>