Jule frames have lots of advocacy; they are very strong. I have Kilmartin
frame; virtually identical to the old frame--no concourse points reductions
with Kilmartin--if that means anything to you. Kilmartin = Australian =
fun people to deal with.
JR
----- Original Message -----
From: "Taylor, Todd S" <todd.s.taylor@lmco.com>
To: <healeys@autox.team.net>
Sent: Wednesday, January 23, 2008 7:01 AM
Subject: Re: [Healeys] FW: Dip/Strip/Sandblast AH Chassis
> How much weight does the Por-15 add to the total frame?? That's tough
> stuff. Sounds like it's better to get the whole thing sand blasted then
> replace the frame, any comments on a Jules frame verse a Kilmartin??
> When it's all said and done looks like about
> the same cost.
>
> -----Original Message-----
> From: healeys-bounces+todd.s.taylor=lmco.com@autox.team.net
> [mailto:healeys-bounces+todd.s.taylor=lmco.com@autox.team.net] On Behalf
> Of richard mayor
> Sent: Tuesday, January 22, 2008 10:40 PM
> To: healeys@autox.team.net
> Subject: Re: [Healeys] FW: Dip/Strip/Sandblast AH Chassis
>
> Hi Guys, What is POR-15 and what is Chassis Coat? Never heard of this
> stuff before. I am preparing a chassis for stripping and trying to
> decide which way to go. Thanks, Richard > POR15 has a "Tie-Coat" that
> acts as a paintable barrier over the POR15 > itself. Apply the Tie-Coat
> and then paint over it with whatever color you > want.> > JR> -----
> Original Message ----- > From:
> "Jody Kerr" <jodyfkerr@gmail.com>> To: "Mark and Kathy"
> <mgtrcars@galaxyinternet.net>> Cc: "Brashear, Jack, N"
> <JNBrashear@garverengineers.com>; > <healeys@autox.team.net>> Sent:
> Tuesday, January 22, 2008 7:31 PM> Subject: Re: [Healeys] FW:
> Dip/Strip/Sandblast AH
> Chassis> > > > Chassis coat comes in black, silver and white if I
> Chassis> > > > remember
> correctly.> > It's used as a cover layer to protect the POR-15 from UV
> Light.>
>>> > If it isn't a "proper" colour you can paint over it. Normally, if>
>>> > >
> there's a specific colour I'm trying to hit I spray with white chassis>
>> coat as if it were a primer and then do my regular paint over top.> >>
>> Jody> >>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as rudedoggg@earthlink.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|