Doug,
Check your catologues. These parts are readily available new from all the
usual suppliers.
Chassis dimensions....if you refer to suspension mounting points, steering
box and idler mounting points, these will be the same.
Rich Chrysler
----- Original Message -----
From: "Doug Newton" <dougnewton@sbcglobal.net>
To: <healeys@autox.team.net>
Sent: Thursday, February 14, 2008 11:12 AM
Subject: [Healeys] Parts Needed
> Hi Folks- I have a BN2 Bell Housing and I am in need of a stock Cross
> Shaft
> (where the throw out bearing fastens) and the Operation Lever that bolts
> to
> the outside of the shaft; can anyone help?
>
>
>
> Also, does anyone know if all of the front chassis dimensions of a 100-6
> to
> BJ8 are the same as a 100-4? I have a drawing of a later chassis, but not
> one for the 100-4.
>
>
>
> Thanks- Doug
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|