John,
Sounds like you have a BN4 series gearbox which will also have a taller 2nd
gear ratio. I wouldn't worry about the exposed solenoid area unless you care
about the appearance of originality when the gearbox cover is off!
The stem of the solenoid should have a bellows style rubber boot to keep the
solenoid barrel protected.
Rich Chrysler
----- Original Message -----
From: "John H" <jhomonek@mindspring.com>
To: <healeys@autox.team.net>
Sent: Thursday, February 21, 2008 10:11 AM
Subject: [Healeys] Transmission OD - 22% vs 28%
> Listers,
>
> I am swapping tranmissions in my BN7. One coming out is a 22% side shift.
> The one going in is a 28% side shift and just rebuilt. Bundled with my
> 3.54 Lempert gear set should give me great cruising capabilities on
> demand.
>
> Question: the 22% has an enclosed area with a removable cover where the
> solenoid shaft engages and disengages the OD (to keep debris and moisture
> out, I assume) The 28% does not have this enclosure leaving it exposed to
> debris and moisture.
>
> The parts manual shows only a metal deflector (called a stone gaurd) in
> front of the solenoid. Is this correct? and is there a way to convert to
> the enclosed version, which seems safer in the long run?
>
> Thanks in advance,
>
> John Homonek
> Atlanta Chapter AHCA
> 1959 BN7
> 1960 AN5
> 1974 Jensen Healey
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|