healeys
[Top] [All Lists]

[Healeys] Fw: Wing Mirror Placement

To: <tomkayb@verizon.net>
Subject: [Healeys] Fw: Wing Mirror Placement
From: "Elton Schulz" <eschulz@frontiernet.net>
Date: Sat, 23 Feb 2008 22:22:39 -0500
Tom, is this the info you were looking for?
Elton
----- Original Message ----- 
From: "Wm. Severin Thompson" <wsthompson@thicko.com>
To: "'Jack Feldman'" <qualitas.jack@gmail.com>; "'Simon Lachlan'" 
<simon.lachlan@homecall.co.uk>
Cc: "'Healey List'" <healeys@autox.team.net>
Sent: Sunday, February 10, 2008 11:16 AM
Subject: Re: [Healeys] Wing Mirror Placement


> On a big Healey, the best mirror placement seems to be 18" forward of the
> fender door joint, and 1" down from the fender bead. It seems be the best
> combination of a lot of factors.
>
> -----Original Message-----
> From: healeys-bounces+wsthompson=thicko.com@autox.team.net
> [mailto:healeys-bounces+wsthompson=thicko.com@autox.team.net] On Behalf Of
> Jack Feldman
> Sent: Sunday, February 10, 2008 10:11 AM
> To: Simon Lachlan
> Cc: Healey List
> Subject: Re: [Healeys] Wing Mirror Placement
>
> Thanks for the reply.
>
> I use them there because I can see much more behind me with the convex
> lenses, and I don't have to turn my head.
>
> The big problem is when they get bumped. It is hard to adjust them. One
> suggestions was to glue them in place. I'm not so sure that is a good 
> idea.
>
> I solved the problem on by Bugeye by carrying a large cane handled 
> umbrella.
> The Sprite was small enough to reach the driver's mirror for adjustment.
>
> Thanks again,
>
> Jack
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as eschulz@frontiernet.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>