Hi Jim,
Not what you asked, but is it possible you need to bleed the clutch?
-----Original Message-----
i have noticed that my bn6 with side shifter seems to shift less smoothly
than
the bj8. it will grind slightly going from 2nd to 3rd if i do not hesitate
slightly when shifting. is this a normal thing or are my synchros getting
worn. they looked good when i had the trans apart, but i was not familiar
with the brass synchros and may need to replace them. everything else in
the
trans looked really good and so far no problems other than this one. can
you
put steel synchros in these older side shifts with no problems? TIA jim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|