The thin side goes inboard to make room for the flange around the opening.
Dave Russell
Randy Dickson wrote:
>Fellow Healeyites,
>I'm in the process of assembling my BJ7 after paint and I was wanting to
>know the orientation of the boot lid seal. One side is slightly thicker
>than the other. Does the thicker portion of the seal go on the inside of
>the perimeter of the boot channel or on the outside? Thanks in advance!
>
>Randy
>Healey Archaeologist
>63 BJ7
>66 Cobra replica
>06 Mini Cooper S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|