Doug
Smiths produced a test box for fuel gauges units and I luckily have one.
With this set to check BN2 gauges;
In the FULL position the resistance is 75 ohms and on EMPTY 7 ohms.
As a rough give a sender unit in the HALF position is around 50 ohms
Regards
>Smiths are 0-90 or 90-0 or 233-30 this according to the tech at MOMA
>
>frogeye@porterscustom.com
>
>Porter Customs
>Albuquerque, NM USA 87107
>505-352-1378
>1954 BN2
>Porter Custom Bicycles
>www.britishcarforum.com/portercustoms.html
>http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff
>
>-----Original Message-----
>From: healeys-bounces+frogeye=porterscustom.com@autox.team.net
>[mailto:healeys-bounces+frogeye=porterscustom.com@autox.team.net] On Behalf
>Of Doug Newton
>Sent: Monday, April 28, 2008 3:26 PM
>To: healeys@autox.team.net
>Subject: [Healeys] Ohms on Fuel Sender
>
>Does anyone know what the Ohm Range is on the Fuel Gauge Sending Unit for a
>BN2?
>
>Thanks- Doug
>
>
>Checked by AVG.
>Version: 7.5.524 / Virus Database: 269.23.5/1400 - Release Date: 4/27/2008
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>Healeys@autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>You are subscribed as ah@jharper.demon.co.uk
>
>http://www.team.net/archive
>
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|