Hi Mike.
I make it exactly 2 inches - correct to within 1 thou.
_______________________________________________
(______________ Alan Bromfield _______________)
(______ \____1957-BN4 ___/ _______)
(_________________________)
-----Original Message-----
From: healeys-bounces+alan.bromfield=virgin.net@autox.team.net
[mailto:healeys-bounces+alan.bromfield=virgin.net@autox.team.net] On Behalf
Of Michael Salter
Sent: Saturday, May 03, 2008 5:47 PM
To: 'Healey List'
Subject: [Healeys] Compression Height of 100 pistons
Does anyone out there happent o have the compression height for 100 pistons?
That is the distance from the center of the wrist (gudgeon) pin to the top
of the piston
Michael Salter
100 (1953)
AHX12 (1953)
Bugeye (1961)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|