David,
My roadside failures have been:
Wire pulled away from ignition switch. Found and
fixed.
Faulty rotor. Replaced with new one.
Hydraulic hose from clutch slave cylinder became
clogged. Made it home and replaced it.
Condenser came loose in the distributor and his rotor
breaking the rotor and searing the pin in the
distributor drive dog.
This is the list to date.
Sorry that I cannot make it conclave, but I hope that
you can post some of the information from your tech
session either on the list or on your website.
Max
1961 BT7
P.S. Thanks for the advice on the repair of the
overdrive. It works well now.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|