healeys
[Top] [All Lists]

Re: [Healeys] Speed Calibration

To: healeylist <healeys@autox.team.net>, Bob Spidell
Subject: Re: [Healeys] Speed Calibration
From: "J. Scott Morris" <jstmorris@yahoo.com>
Date: Sun, 18 May 2008 19:58:59 -0700 (PDT)
   Hi Bob;

   Here is an Excel spread sheet I developed many years ago that
   calculates MPH & RPM given various rear-end ratios and overdrive
   reductions.  The various inputs are identified in !blue" and a graph
   is provided which illustrates the MPH at given RPM.  The spread sheet
   is based on two sources:

   1.       "Laycock Overdrive - Section 1: Working Principles,
   Maintenance and Fault Finding"

   2.       "Laycock Overdrive ...as fitted to the AUSTIN-HEALEY 100"  a
   brochure provided when each car was purchased

   If you have any questions, do drop me a note.

   --Scott Morris; Simcoe, Ontario, Canada; "60 MkI BN7 & "62 MkII BT7

[demime 1.01d removed an attachment of type application/octet-stream which had 
a name of MPH]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>