Alan
I have noticed this problem with my BT7 also-one of the large nuts seems to
work loose after a while. Even tightening up the cotter pins does not seem
to help. 1st noticed very loose, 2nd time probably 1/2 turn
Must look further into it
Cheers John
BN1
BT7
----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "healeys" <healeys@autox.team.net>
Sent: Friday, July 11, 2008 1:57 PM
Subject: Re: [Healeys] front end knock
> Jim -
>
> Glad my suggestion worked! Make sure the little nut on the bottom of the
> kingpin is tight too - it tightens the fulcrum pin against the lower
> kingpin
> link - this will help tighten up the suspension too.
>
> Best,
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
>
> On Fri, Jul 11, 2008 at 11:35 AM, James Shope <healeymanjim@hansencc.net>
> wrote:
>
>> Alan Seigrist, you be da man!!! you told me to check the lower A-arm
>> bolt/bushing to see if it had come off. nothing was missing but did
>> tighten
>> up the big nuts at the bottom of the arms and that stopped the knock. it
>> was
>> not very loose at all but 1/4 turn was enough to make the knock stop.
>> this
>> list is invaluable for all the "been there, done that" people who are
>> willing
>> to pass along their knowledge. healeymanjim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|