healeys
[Top] [All Lists]

Re: [Healeys] Generator Rebuild

To: "Spridget List" <spridgets@autox.team.net>
Subject: Re: [Healeys] Generator Rebuild
From: Bob Spidell <bspidell@comcast.net>
Date: Fri, 15 Aug 2008 06:42:45 -0700
Hi Price,

In general, you do not want a conductive material (carbon) any place it 
shouldn't be.  Probably not a huge issue in a generator, but I would at 
least clean the dust off with dry compressed air.  A can of the stuff 
used to clean computer keyboards should work pretty good.  Also, I've 
used two aerosol products from CRC: Electrical Parts Cleaner and 
Electrical Contacts Cleaner.  Parts Cleaner is the more aggressive of 
the two, and can remove paint, but it should be OK for a generator 
(except for the painted outside).  Contacts Cleaner doesn't seem to 
remove paint, and works well on more sensitive electronic stuff.  Both 
should be available at about any local parts store.


bs


Price wrote:
> I am putting new brushes and a new bronze bushing in the generator from my 
>BJ8. There is a considerable amount of carbon dust on the inside, i.e. 
>covering the field coils and armature. Should this be cleaned and if so, what 
>solution should be used if any?
>
> Thanks for the help. 
>
> Price Lindsay
> BJ 8
>
>   


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>