...or, as I posted several times, go to Muggyweld.com. Mike sells an alloy
and flux that works as well or often times better than TIG'ing for old
Healey "Birmabrite" shroud alloy.
frogeye@porterscustom.com
Porter Customs
Albuquerque, NM USA 87107
505-352-1378
1954 BN2
Porter Custom Bicycles
www.britishcarforum.com/portercustoms.html
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff
-----Original Message-----
From: healeys-bounces+frogeye=porterscustom.com@autox.team.net
[mailto:healeys-bounces+frogeye=porterscustom.com@autox.team.net] On Behalf
Of Charley Braum
Sent: Sunday, August 31, 2008 8:05 AM
To: Healey List
Subject: [Healeys] Aluminum Gas Welding
Google 'Alumaloy' - you'll also find a couple articles explaining
procedures for using it.
I've used it on boot lids (cracks at the prop rod attachment point and
elsewhere) and shroud channel (cracks) repairs with good success.
CB
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|