healeys
[Top] [All Lists]

Re: [Healeys] wire harness fasteners

To: Rich C <richchrysler@quickclic.net>, <info@atteanlodge.com>,
Subject: Re: [Healeys] wire harness fasteners
From: andy pole <ampole@hotmail.com>
Date: Sun, 7 Dec 2008 22:18:59 +0000
Brad

As Rich pointed out you are looking at the wrong holes, he outlines the ones
in the sides of the main frame members, you want the holes that are on the
bottom of the frame, the only one you use in the side of the frame (for main
loom) is near the footwell / gearbox, the first on the bottom of the frame is
about level with the front outrigger, 2 more behind this before they use the
rear of the frames centre x member before going upwards behind the rear heel
board, will try and take some pics.


cheers Andy

> Brad,> > There are originally no inserts to go into the frame to hold these
> fasteners. Most of the screws were about a #8 self tapping shank so either >
you have had some previous owner drill things grossly oversize or you may >
have been looking at the set of brake line or fuel line hairpin clip holes >
by mistake.> > Rich Chrysler>
_________________________________________________________________
Get Windows Live Messenger on your Mobile
http://clk.atdmt.com/UKM/go/msnnkmgl0010000001ukm/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>