healeys
[Top] [All Lists]

[Healeys] Roadster windshield new glass installation - Part 1

To: healey list <healeys@autox.team.net>
Subject: [Healeys] Roadster windshield new glass installation - Part 1
From: Charlie Baldwin <mgcharlie@comcast.net>
Date: Fri, 09 Jan 2009 10:41:25 -0500
I posted this previously, but the limitations of the list software 
rejected it for being too large, so it will be in two installments.

I just wanted to pass on the method that I used in installing the new 
windshield in my BT7 Mk.II.
This has come up before on this list with people having problems with 
the rubber that wraps around the glass.  I got the new glass, rubber, 
and the corner bracket set from Moss.  When I got everything together I 
started by measuring to make sure that the new glass with rubber wrapped 
around it would go into the channels of the windshield frame.  The Moss 
rubber was way too thick and would have never fit.  You really only want 
the slightest compression of the rubber, if any.
 I looked for other alternatives and found some stuff called rubber 
glass setting tape at Restoration Specialties.  I've seen their stand at 
Hershey and Carlisle flea markets many times.  Here is a link to their 
catalog: 
http://www.restorationspecialties.com/2008%20catalog%20pdf/2008%20Catalog%20ebook.pdf
 

The glass setting tape is on page 32 of the catalog.  What is nice is 
that they have different thicknesses of this rubber.  I needed the 3/64 
thick material.  When I started to install it, I found that the rubber 
was different than most rubber.  I suspect that it is only partially 
vulcanized because you could bend it and it would pretty much stay 
bent.  At the miter joints that I made at the corners and at the butt 
joint where it met itself it could be squashed together to self seal.  
Even though it would bend and sort of stay that way, I glued it to the 
glass with contact cement, which meant that when I tapped the frame on I 
didn't have to worry about holding the rubber in place at all.

Charlie Baldwin

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Roadster windshield new glass installation - Part 1, Charlie Baldwin <=