Tim,
The inverted metal lip should be covered with the matching vinyl as the trim
panels. The rear floor carpet will indeed be pushed tightly up under the
flange, and will be hed there by the compression of the carpet, being forced
to stay there by the floor snaps. Pictures included.
Rich Chrysler
----- Original Message -----
From: <tld6008@mchsi.com>
To: "Healey list" <healeys@autox.team.net>
Sent: Wednesday, February 04, 2009 8:56 PM
Subject: [Healeys] (no subject)
> I am trying to finish the interior of my BN7 and am unsure how to deal
> with the horizontal feature that is just above the drive shaft tunnel on
> the vertical bulkhead behind the seats. I believe the Armacord from the
> floor fits up underneath it and the carpet on the rear deck runs down to
> it but what actually is done with the what ever it's called.
>
> --
> Tim Davis BN7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
[demime 1.01d removed an attachment of type image/jpeg which had a name of 3000
Rdstr Detail 0002.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010068.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
P1010067.JPG]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|