I'm looking at a spare carrier I have and it looks like the recess for the
thrust washer is cut so that if the washer is of the correct size it will fit
between the gears. Maybe you need to dress down the circumference of the
washer. That would seem to be a lot simpler and the washer won't fit properly
in the recess if it is too big anyway. Bill Lawrence > From:
britishcars@shaw.ca> To: healeys@autox.team.net> Date: Sat, 7 Feb 2009
17:28:16 -0800> Subject: [Healeys] Overdrive Planatary Gears> > Hi All,> > >
> I'm assembling my overdrive.> > > > Before I mate the sun gear into the
planetary carrier, there is a bronze> bush that has to be inserted into the
seat of the planetary carrier. There> is no way this bronze bush is going
into the carrier without removing one of> the planet gears.> > > > Each
planet gears seem to have one pin holding the shaft in place...I have> no idea
how to get this pin out to remove the shaft??????> > > > Any and all help
appreciated.> > > > Thanks> > Paul>
_______________________________________________> Support Team.Net
http://www.team.net/donate.html> > Healeys@autox.team.net>
http://autox.team.net/mailman/listinfo/healeys> > You are subscribed as
ynotink@msn.com> > http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|