Thanks , I was able to get the trunnion off but I can't get the fulcrum
Bolt out now, I guess I'll have to cut that off.. got it soaking I PB
blaster right now..
There's two trunnions on Ebay right now..
-----Original Message-----
From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net] On Behalf Of G Vernau Sr
Sent: Friday, February 06, 2009 5:09 PM
To: healeys@autox.team.net
Subject: [Healeys] remove trunnions- Todd
Todd,
I had to use a high speed cut off wheel to cut off the top part
(threaded part)
of the kingpin, before the trunnion would come off. Be careful not to
damage the
trunnion, you can buy new kingpins several places (some of dubious
quality) but I
don't know where you'll find the trunnion.
Good luck,
George Vernau Sr
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as todd.s.taylor@lmco.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|