Jean,
Sorry, but that is not the one Rich needs. He needs it for the early axle.
Josef Eckert
Konigswinter / GERMANY
-----Urspr|ngliche Nachricht-----
Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net] Im
Auftrag von Jean Caron
Gesendet: Donnerstag, 26. Februar 2009 15:42
An: richchrysler@quickclic.net; healeys@autox.team.net
Betreff: Re: [Healeys] Spiral Bevel Diff Gasket
Rich:
Check www.ahead4healeys.co.uk they have the part you need, part#RX4010 and its
cost is 0.95 pound
Jean Caron
Winnipeg
> From: richchrysler@quickclic.net
> To: healeys@autox.team.net
> Date: Thu, 26 Feb 2009 09:24:25 -0500
> Subject: [Healeys] Spiral Bevel Diff Gasket
>
> Hello all,
>
> I'm continuing work on this early series spiral bevel rear axle for a
> July
'54
> BN1. Thanks to Mike Salter for directing me to some excellent shims of
> the right size for the crown pinion end float, available from
> Spaenaur, the excellent fastener supply house in Kitchener, Ontario.
>
> Now everything's going back together and I suddenly discover there
> doesn't seem to be a diff gasket available. That's the big round one
> that would
seal
> the diff body casting to the axle case.
>
> I find this rather strange, as some 6000 or so BN1's and the 100S used
> this axle, and the 4 bolt hub gasket is readily available.
>
> Any leads to finding this diff gasket, anybody?
>
> Rich Chrysler
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|