Steve: Is that a standard Healey choke cable? If so, twisting the knob
clockwise locks it in place. No wedge needed. If it is not a Healey cable,
then the wedge looks like it will work for you.
(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "Steve B. Gerow" <steveg@abrazosdata.com>
To: "Ed's Shop" <shop@justbrits.com>
Cc: <healeys@autox.team.net>
Sent: Friday, February 27, 2009 9:24 PM
Subject: Re: [Healeys] Update to DMD choke pictures
> Ed,
> Nothing as lame as a clothespin.
>
> It's the little wedge, pop-riveted to the inside of the BJ8 bracket. When
> you pull the crossbar outward past it, it rides over the wedge and snaps
> down in place, leaving the handle all the way out. A slight twist
> counter-clockwise rotates the end of the bar over the wedge allowing you
> to push the choke home, fully seating the jets.
>
>
> --
> Steve Gerow
>
>
>
>> -------Original Message-------
>> From: Ed's Shop <shop@justbrits.com>
>> Subject: RE: [Healeys] Update to DMD choke pictures
>> Sent: Feb 27 '09 20:26
>>
>> I don't 'see' any 'locker' much less a cloths pin<G>, Steve????
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as thehartnetts@earthlink.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|