----------------------------------------
> From: haywoodone@hotmail.com
> To: ashbrook@mail.nih.gov; healeys@autox.team.net
> Subject: RE: [Healeys] Removing BJ8 speedometer
> Date: Mon, 16 Mar 2009 20:28:26 -0400
>
>
> Hi Doug,
>
> The two wires are attached to lights that illuminate the gauge and the high
beam indicator. Carefully remove (pull) the bottom light (high beam indicator)
out of the black plastic sleeve leaving the sleeve attached to the speedo
housing. Pull the entire light assembly out of the top area-it just pops in
and out of the hole with little compression fingers. Don't pull on the wires
though.
>
> Take care,
>
> George Haywood
> '65 bj8
>
>
>
>> From: ashbrook@mail.nih.gov
>> Subject: [Healeys] Removing BJ8 speedometer
>>
>> I need to send the speedometer for my 67 BJ8 in for repair. I was able to
>> remove it except for the 2 wires, which I assume are for the panel lights.
I
>> am unable to figure out how to remove those wires. Can anyone tell me how
to
>> do it? Thanks.
_________________________________________________________________
Windows Live Contacts: Organize your contact list.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|