It should be tight. Try using a fibre or copper washer .
Kees Oudesluijs
mailmaineguide.com schreef:
> List: I just installed a new oil pressure/temp gauge in the healey rebuild.
> Even though I have the backing nut firmly tight the sensor itself is still
> slightly loose, obviously, the best way to tell if it will leak is to fill the
> radiator but I am too much a coward to do it, I need someone to tell me that
> it is perfectly normal for the sensor to be loose or am I missing something???
> Many thanks.
>
> Brad Holden
> 67 BJ8 soon to be running (I hope)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.287 / Virus Database: 270.11.58/2061 - Release Date: 04/15/09
>19:52:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|