healeys
[Top] [All Lists]

Re: [Healeys] 100 water pump

To: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>
Subject: Re: [Healeys] 100 water pump
From: John Harper <ah@jharper.demon.co.uk>
Date: Fri, 17 Jul 2009 16:35:31 +0100
Tadeusz

This looks correct in general terms for a 100 but it is configured for 
an engine with a direct heater outlet. This tube could be unscrewed and 
the heater tap fitted instead.

Without a pulley fitted it is hard to tell but it could be for use with 
a later 4 cylinder engine such as a petrol gypsy or London Taxi.

Most application do not fit a grease nipple and only have a small access 
screw into which a few drops of oil should be added from time to time. 
With a grease nipple there is a temptation to over lubricate.

Without a pulley I would have thought that the price is rather high.

Regards
>
>Is the pump advertised here http://tinyurl.com/lcc6xm on ebay the original
>one?
>
>Thanks, Tadek
-- 
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>