healeys
[Top] [All Lists]

Re: [Healeys] Socket Drive Dimensions

To: <coudesluijs@chello.nl>
Subject: Re: [Healeys] Socket Drive Dimensions
From: andy pole <ampole@hotmail.com>
Date: Mon, 3 Aug 2009 16:51:46 +0000
Kees



You actually confirmed what I was hinting at, that unfortunately due to the
times the building trade (layman) still order in feet and inches but it has to
be labelled in metric to 'comply'. And as you correctly identified that a
planed piece of 2" will reduce from 50mm to 45mm, the wood has never changed
only the politically correct label, but to the trade its still 2" planed.

I think your problem in the 70s is that this was when we attempted to change
(or have it forced on us)



I think you will find 8" is still 2440mm (they round it up from 2438.4mm to
make it easier)



I have been 'dragged' up using both forms of measurement and did some full
size 'setting out' for a time (look it up). I still have to think twice about
unf though, and usually pick up the wrong spanner.



cheers Andy


_________________________________________________________________
Windows Live Messenger: Thanks for 10 great yearsenjoy free winks and
emoticons.
http://clk.atdmt.com/UKM/go/157562755/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>