Steve,
The 50 amp fuse is supposed to protect the horn circuit. Note that the horn
button operates by grounding a hot wire which comes from the horn. I would
start by checking the horn button and trafficator.
HTH,
Peter Schauss
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys-
> bounces@autox.team.net] On Behalf Of Mackie, Stephen
> Sent: Tuesday, August 11, 2009 11:39 AM
> To: healeys@autox.team.net
> Subject: [Healeys] turn signal and fuse
>
> I just got my car back from the paint shop and it looks great. However
> when I put the turn signal on the lower fuse of the set of two 50 amp
> blows and the turn signal remains off. Obviously a short, but I am not
> an expert. Should I take it in or try to fix it myself?
>
> Steve
> 62 bt7 tricarb
> 67 sprite
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as schauss@worldnet.att.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|