dont forget to buy an assortment of the correct shims for the roller bearings.
you won't be able to adjust the play of the bearing correctly with the shims
that were supplied with the original "oilite" set.
Regards
Thomas Willig BN2
-----Urspr|ngliche Nachricht-----
Von: Stephen Hutchings [mailto:s.hutchings@rogers.com]
Gesendet: Dienstag, 22. September 2009 04:00
An: healeys@autox.team.net
Betreff: [Healeys] Trunnion bearings
I bought a king pin set from someone who had surplus- it's the set
that AH Spares sells- and it came with a set of trunnion bearings -
the original oilite type. I hadn't realized that the set would come
with the trunnion bearings, so I bought a set separately, which
turned out to be the roller bearing type. I've heard extravagant
claims for the roller bearings, but wonder what the wisdom of the
list says about which set to use.
Stephen, BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|