healeys
[Top] [All Lists]

Re: [Healeys] Trany Noise Question

To: "Mark LaPierre" <lapierrem@sbcglobal.net>, <healeys@Autox.Team.Net>
Subject: Re: [Healeys] Trany Noise Question
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Tue, 20 Oct 2009 20:50:42 -0500
Long shot, but when I replaced the U joints on my 100 I did not get one of 
the retaining rings fully seated and so the driveshaft was rotating slightly 
out of round and I got noise and vibration that may be similar to your 
description, since you mentioned new u-joints and speed sensitive it came to 
mind.

A couple thunks to an appropriately sized socket to properly seat the 
retaining ring or circlip and the issue was solved.

Greg Lemon 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>