What you want to do is make sure the carbs are in good shape. The only
scenario that a common Healey would have in not getting rich enough is
an air leak.
If you just want to get richer, change needles.
BTW: your choke control should get it plenty rich.
Wilko
On Dec 2, 2009, at 7:48 AM, Jon Buhler wrote:
> Is there any way to extend the adjustment of the Jet adjusting
> screw. The
> screws have bottomed out but I still need just a little more
> enrichment to
> get the carbs to perform when the pistons are lifted. Thanks for
> your help.
> Jon
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as e-wilkins@cox.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|