healeys
[Top] [All Lists]

Re: [Healeys] Looking for a BN2 rh steering lever

To: "'Rich C'" <richchrysler@quickclic.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] Looking for a BN2 rh steering lever
From: "T+ B Willig" <willig@wtnet.de>
Date: Sat, 5 Dec 2009 17:35:54 +0100
Hi Rich,

thanks for the advice, I was thinking already about that, but I was to
scared, because I did not know which material it is made of.

Have a nice weekend


Thomas

-----Urspr|ngliche Nachricht-----
Von: Rich C [mailto:richchrysler@quickclic.net]
Gesendet: Samstag, 5. Dezember 2009 02:49
An: T+ B Willig; healeys@autox.team.net
Betreff: Re: [Healeys] Looking for a BN2 rh steering lever

I took a bent lever to my local machine shop (owner has his aircraft
mechanic's certificate) and for $35.00  and a good hydraulic press, they
were able to bend it back exactly to original configuration. I had taken
them another good one for accurate measurements and they got it to within a
few thousandths of an inch.

Rich Chrysler

----- Original Message -----
From: "T+ B Willig" <willig@wtnet.de>
To: <healeys@autox.team.net>
Sent: Friday, December 04, 2009 4:35 PM
Subject: [Healeys] Looking for a BN2 rh steering lever


> After long measuring, comparing the lft side of the steering to the right
> side, aided by some members of the list, I found out that my rh steering
> lever on my 100 BN2 is seriously bend inwards. Is someone on the list able
> to help me with a good s/h unit?  I have shipping addresses in the US and
> in
> Europe were the part could be send. So don't be scared off about shipping
> issues.
>
>
>
> Thomas Willig
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>