IMHO, I would fill the cyl with marvel or or pentrating oil as well as the
crankcase. Spin the engine
by hand and put decicant to absorb moisture and seal in a plastic bag.
On Mon, Dec 7, 2009 at 12:05 PM, Jerry Costanzo <grumpyinloomis@ssctv.net>wrote:
> Not to break up the conversation about Chinese parts but:
>
> I have an extra engine, which is now stored in a barn in a plastic bag.
> The
> pistons, head, cam, crank and rods are all in place from whenever this was
> taken out of a BJ7 or 8. In your opinion, is it better to let it sit
> together or take it apart and clean it up before the rust puts it into a
> solid
> state? I have no problems with storage room. I can store it either way.
> The barn does not leak but there is no moisture control in there.
>
> Jerry
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as eyera3@gmail.com
>
> http://www.team.net/archive
>
--
I Erbs
Portland, OR
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|