healeys
[Top] [All Lists]

Re: [Healeys] Electronic Ignition

To: eric.frenken@brits-n-pieces.com
Subject: Re: [Healeys] Electronic Ignition
From: Oudesluys <coudesluijs@chello.nl>
Date: Tue, 26 Jan 2010 10:21:19 +0100
True, but more for competition applications with modified, tuned engines 
and high revs. For normal use the standard distributor will do fine if 
in good nick, i.e. springs, balance weight pivots, base plate, vacuum 
capsule.
In the end it will depend on looks (Lucas-Bosch) for some and/or the 
price to pay for the restoration/repair of the existing unit (if 
neccesary) plus the price for a Pertronix (ca. $100) or similar and the 
price for the matching 123-Ignition (ca. $320, slightly more for pos. 
earth).

Kees Oudesluijs
NL



Eric Frenken schreef:
> What about spark balancing and automatic dwell control?
>
> -----Urspr|ngliche Nachricht-----
> Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
> Im Auftrag von Oudesluys
> Gesendet: Sonntag, 24. Januar 2010 22:04
> An: Pieter and Linda
> Cc: Healey forum
> Betreff: Re: [Healeys] Electronic Ignition
>
> The charm of the 123 ignition is that you have a choice of quite a lot 
> of timing curves to play with. How the durability/reliability will 
> compare with others will be a matter of time. It does a very good job 
> when new.
> If the condition (play, springs, weights, membrane, lubrication etc.) 
> and timing curve of your existing distributor are as they should be, 
> there is little advantage to be gained over a Pertronix, Lumenition etc.
> Kees Oudesluijs
> NL
>   
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.730 / Virusdatabase: 271.1.1/2645 - datum van uitgifte: 01/25/10 
>20:36:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>