healeys
[Top] [All Lists]

Re: [Healeys] follow up question about carbs

To: eyera3@gmail.com, healeys@autox.team.net
Subject: Re: [Healeys] follow up question about carbs
From: warthodson@aol.com
Date: Wed, 17 Mar 2010 13:37:18 -0400
If possible, make sure you get all the throttle & choke linkage & the air
cleaners. I think you said you are getting the intake manifold with the carbs.
Do you have a cam equal to the BJ8 cam?
The angled chassis support that goes from the frame near the front suspension
to the pedal box will need to be modified to clear the HD8 air cleaners.
Gary Hodson





-----Original Message-----
From: I Erbs <eyera3@gmail.com>
To: healey help <healeys@autox.team.net>
Sent: Wed, Mar 17, 2010 10:28 am
Subject: [Healeys] follow up question about carbs


If I go with the BJ8 set up will there be an issue with port sizes? by that
 mean, will the 2" manifolds match the intake port size or will there be a
tep down? I do not want to pull the head and open up the ports. If a
ismatch, what will the effect be? Obviously more turbulence, but will it be
nough to negatively impact induction?
Thanks,
--
 Erbs
ortland, OR
______________________________________________
ealeys@autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>