healeys
[Top] [All Lists]

Re: [Healeys] healboard lift a dot fastener position bj8

To: Rich C <richchrysler@quickclic.net>, <healeys@autox.team.net>,
Subject: Re: [Healeys] healboard lift a dot fastener position bj8
From: andy pole <ampole@hotmail.com>
Date: Mon, 22 Mar 2010 19:03:35 +0000
Rich and Ed



I did think about waiting until I bought a new blue tonneau (someway off when
I get the hood, and my old one is black) as I guess the position of the
sockets on these can also vary, I just thought there may be a bit of give in
the position.



My car obviously had new heelboards Ed, and even though I took every position
of all the floor fixings I never took these as I thought the metal was
salvageable!



I thought it may be easier to drill the holes with no carpet and also fix
without the rear seats in place. Will be a sod to do when everything else is
done. Nevermind trust your combined judgement as always.



many thanks Andy
>
> I have found that it's best to select the positions once you have the
> tonneau cover fitted in place with the tonneau bar. That way, any variables
> (and there are many) can be taken into account as you fit your particular
> tonneu cover to your car. They certainly seemed to vary on original cars and
> were not particularly level either.
> For instance the ones in this picture are in their original positions.
>
> Rich


_________________________________________________________________
We want to hear all your funny, exciting and crazy Hotmail stories. Tell us
now
http://clk.atdmt.com/UKM/go/195013117/direct/01/
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>