Look at the Doorman catalog online. They do make studs with the coarse
threads on the long end. You might have to order a whole box, but it would
solve the problem
On Mon, Apr 19, 2010 at 5:43 AM, Bob Spidell <bspidell@comcast.net> wrote:
> All the studs I saw had coarse threads on the 'short' end--the one that
> goes into the manifold. But, yes, theoretically you could do that.
>
> Kinda wonder why Austin used fine/fine.
>
> bs
>
>
>
> Richard Ewald wrote:
>
>> Other than the fact you would have to buy a handful of coarse nuts, is
>> there any reason you could not use coarse / fine studs?
>> Rick
>>
>> >>'Standard' studs--the kind you can get at the hardware store--are coarse
>> thread on one end and fine on the other. I need fine on both ends.
>>
>>
>>
>>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> *******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|