> Ronald -
>
> Just call around to guys like British Car Specialists or Bob Yule, someone
> out there will have a used tachometer drive housing and shaft. I would not
> expect it to cost all that much money. Once you get it, you can just bolt
> it to your BJ8 motor , you'll just have to get a cable to connect the drive
> to your tach.
>
> The other option is to purchase a cheapo electronic tachometer and then
> swap out the guts on your mechanical tach and that will work too, but not
> original.
>
> If you go here:
>
> http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=36376
>
> and look at part id# 106 to 125, that is all the parts you need. If
> someone is selling this used, they'll just sell you the whole thing in one
> shot.
>
>
>
> Alan
>
> '52 A90
> '53 BN1
> '59 Jag Mk IX
> '64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|