Hi Tom
I just use Cereal box cardboard with gasket goo on all surfaces, both
sides of
gasket and both surfaces and have had no problem with leaks.
Bob 1963 BJ7
--------------------------------------------------
From: "Thomas Morrione" <tjmorrio@colby.edu>
Sent: Saturday, May 08, 2010 4:17 PM
To: <Healeys@autox.team.net>
Subject: [Healeys] Front shock gasket question
> List folks,
>
> I9m about to reinstall front shocks on my 65 BJ8. They were cleaned up and
> painted, but have been sitting for about two months in a box. I now notice
> that the gaskets are weeping a little oil -- even after a tightening up
> that back plate a month ago. They9re both in good shape otherwise I think
> (good steady resistance). Is it ok to jus take the back plate off and
> replace the gaskets or will bits pop out at me requiring more internal
> work?
>
> Good source for gaskets? Or, can I make them up of standard gasket
> material?
>
> Thanks,
> Tom
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bj7ah@acanac.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|