If you are going to se Hylomar put it on the gasket, not on the threads.
Bill Lawrence
> Date: Fri, 14 May 2010 21:35:51 +0000
> From: bspidell@comcast.net
> To: coudesluijs@chello.nl
> CC: healeys@autox.team.net
> Subject: Re: [Healeys] Redline leak
>
> The O/D plug isn't tapered, has coarse threads and the gasket is a hard
fiber that usually doesn't fit too well.
>
> bs
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
>
>
> This would be teflon tape. No harm in trying if it is a tapered plug. It
> will not help with non tapered thread.
> Kees Oudesluijs
> NL
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink@msn.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|