Hi Carl,
You've lost me there with the brown wire bit. Brown in the Healey wiring
harness is direct full time battery power.
If you're installing new headlamp wiring pigtails they should be 3 wires per
pigtail braided together.
Colours should be:
- blue with red tracer (headlamp low beam power feed),
- blue with white tracer (headlamp high beam power feed) and
- black (earth or ground)
Rich Chrysler
--------------------------------------------------
From: "Dr. C. Rubino" <ruvino@ripnet.com>
Sent: Friday, June 11, 2010 2:26 PM
To: "healeylist" <healeys@autox.team.net>
Subject: [Healeys] heavy duty headlight wiring harness
> Bought this from VB. Directions seem to have been translated from Chinese.
>
> Calls for plugging into headlight closest to battery. In a BN-4 would that
> be
> right or left headlight or does it make a difference since the brown wire
> is
> routed to both sides.?
>
> Carl
> BN-4(L)
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|