Cheeck the connector at the left side of the firewall.B There should be a
double connector with four red wires.
----- Original Message -----
From: "Bob Brown" <blkbt7@yahoo.com>
To: "Healey List" <healeys@autox.team.net>
Sent: Saturday, June 12, 2010 1:40:32 PM
Subject: [Healeys] BJ8 Wiring
My BJ8 has no rear "driving lights" or license plate light.
I have stop
lights and turn indicators (indicators appear to be a seperate circuit).
I
have no continuity at tne connector (red wire) in the boot. To me this tehn
tells me the problem is farther forward.
Where is the next connector for the
red wire? B My diagram has this connector spliting off to the switch and to
the
front "pilot" lights which are working.
Thus the problem could be at this
connector. New wiring harness, bulbs,etc.
TIA,
Bob
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rbeni3000@wowway.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|