healeys
[Top] [All Lists]

Re: [Healeys] Zinc or Stainless Steel

To: jmsdarch@sbcglobal.net, Healeys@autox.team.net
Subject: Re: [Healeys] Zinc or Stainless Steel
From: Oudesluys <coudesluijs@chello.nl>
Date: Thu, 29 Jul 2010 09:15:46 +0200
You can use stainless steel bolts, nuts and washers on steel to steel 
constructions, but NOT on steel to aluminium because of severe 
electrolytic reactions. In that case use zinc or cadmium plated washers, 
bolts, nuts and screws.
If you can get hold of them you can use titanium aircraft bolts and nuts.

In the late sixties I was apprentice at Fokker Aerospace and also had 
access to the workshops where they build and overhauled their aircraft.
All used bolts, nuts and plates were scrapped and replaced with new ones 
as standard procedure. Some were of titanium, very tough stuff, better 
than grade 8.
The used material was perfectly alright and I collected quite a lot of 
it. I still use bolts and nuts from that hoard. Practically all is UNF 
thread.
Kees Oudesluijs
NL


Josef.Eckert@t-systems.com wrote:
> John,
> Even restoring my cars to Concours Standard (European style), I use stainless
> steel bolts wherever its possible, except engine internals, some BSF and other
> threads I can`t get in stainless steel, and suspension. All others are
> stainless steel on my cars and I love it. They do not discolour, can be easily
> polished, length cut to the needed etc. Lots of advantages in my mind.
>
> Josef Eckert
> Konigswinter/Germany
> 54BN1, 62BT7, 65Sprite and others

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
coudesluijs.vcf]
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>